The Playbook
PricingPricing guide for every trade →

How Much to Charge for Pressure Washing a Deck

Short answer

Price deck washing from the time on site, including setup, cleaning, brightening and rinsing, plus chemicals and your equipment and insurance overhead, then divide by one minus your margin. In our example a 300 square foot deck prices at $180.00, about $0.60 a square foot, and a 600 square foot deck at $294.00, about $0.49.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 3 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Sell the stain
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Deck washing is gentler work than concrete. Too much pressure raises the grain or gouges the boards, so it takes more care and a cleaner that does most of the work. Price the time, not just the square feet.

The formula

  1. Measure the deck in square feet, plus stairs and railings.
  2. Time on site: setup, applying cleaner, washing at low pressure, brightening, rinsing and pack-up.
  3. Chemicals: deck cleaner and brightener.
  4. Add overhead for the pressure washer, surface cleaner, vehicle and insurance, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $28 an hour
  • Overhead: 30%
  • Margin: 35%

300 square foot deck: 2.5 hours on site, $20 of cleaner and brightener. Labor $70. Labor plus chemicals $90. Overhead $27. Total cost $117. Price: $117 / 0.65 = $180.00, about $0.60 a square foot.

600 square foot deck with stairs: 4 hours on site, $35 of cleaner and brightener. Labor $112. Labor plus chemicals $147. Overhead $44.10. Total cost $191.10. Price: $191.10 / 0.65 = $294.00, about $0.49 a square foot.

The bigger deck costs less per foot because setup and pack-up are the same. The pressure washing pricing calculator prices any job from your own numbers.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • Railings and stairs: spindles take far longer per foot than open decking.
  • Wood and condition: soft cedar needs low pressure. Gray, weathered wood may need a second round of brightener.
  • Composite decks: they need different cleaners and less pressure. Ask what it is before you quote.
  • Old stain: stripping failing stain is a separate, slower job.

Sell the stain

A clean deck is ready for stain. Quote the wash and the stain together. The guide to deck staining covers that side.

Pricing a similar job? See How Much to Charge for Pressure Washing Per Square Foot and How Much to Charge for House Washing, or run your own numbers in the pressure washing pricing calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

Pressure washers, painters and deck builders send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge to pressure wash a deck? Build it from time on site, chemicals and overhead at your margin. In the example a 300 square foot deck comes to $180.00.

How much is deck washing per square foot? It falls as the deck gets bigger. In the example it's about $0.60 on 300 square feet and $0.49 on 600.

Do I charge extra for railings and stairs? Yes, they take much longer per foot. Count them in your time.

Can I pressure wash a composite deck? Usually with a different cleaner and lower pressure. Check the manufacturer's care guide first.

Run your numbers: the free pressure washing pricing calculator prices any job from your own costs. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading