The Playbook
PricingPricing guide for every trade →

How Much to Charge for Pressure Washing Per Square Foot

Short answer

Your per-square-foot price is your cost per hour divided by the square feet you clean per hour, plus chemicals and overhead, priced to your margin, with a minimum charge for setup and the drive. In our example that's about $0.27 a square foot on a 1,000 square foot driveway and $0.23 on a 3,000 square foot job, because setup time is spread over more area.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 3 min read

In this article
  1. The formula
  2. Worked examples: flat concrete
  3. Set a minimum charge
  4. Different surfaces, different rates
  5. Per square foot or per hour?
  6. Meet other owners
  7. FAQ

Customers like a per-square-foot price because it's easy to compare. The danger is copying someone else's number: your speed, your equipment and your costs decide what a square foot is worth to you.

The formula

  1. Time how many square feet you clean per hour on each surface (flat concrete, siding, decks).
  2. Add the time every job takes no matter its size: the drive, setup, hoses and cleanup.
  3. Price the whole job from labor, chemicals and overhead to your margin.
  4. Divide the price by the square feet. That's your per-square-foot rate for that kind of job.

Your speed is the number that matters most. A surface cleaner on flat concrete is far faster than a wand on a fence, so each surface gets its own rate.

Worked examples: flat concrete

These are example numbers. Time your own work and use your own costs.

  • Labor cost: $45 an hour (your crew's wage with taxes and insurance)
  • Speed: 500 square feet an hour with a surface cleaner
  • Setup, the drive and cleanup: 45 minutes a job
  • Chemicals and fuel: $0.02 a square foot
  • Overhead: 30%, margin: 30%

1,000 square foot driveway: 2 hours of cleaning plus 0.75 hours of setup = 2.75 hours. Labor $123.75. Chemicals $20. Overhead $43.13. Total cost $186.88. Price: $186.88 / 0.70 = $266.96, about $0.27 a square foot.

3,000 square foot job: 6 hours plus 0.75 hours = 6.75 hours. Labor $303.75. Chemicals $60. Overhead $109.13. Total cost $472.88. Price: $472.88 / 0.70 = $675.54, about $0.23 a square foot.

The bigger job costs less per square foot because the 45 minutes of setup is spread over three times the area. That's why a flat per-square-foot rate undercharges small jobs.

The pressure washing pricing calculator prices any job from your own numbers.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

Set a minimum charge

Every job carries the drive and setup. Price your smallest real job and make that your minimum, so a 300 square foot patio still pays. Then use your per-square-foot rate above the minimum.

Different surfaces, different rates

  • Flat concrete with a surface cleaner: usually your fastest work, so the lowest rate.
  • House siding (soft wash): slower, more chemical, ladders and care around plants.
  • Decks and fences: slow, detailed work; often better priced by the job.
  • Roofs: slow and risky; price by the job with the extra time and insurance.

Time a few jobs of each and build a rate for each surface. For whole-job pricing, see how to price a pressure washing job.

Per square foot or per hour?

Know your hourly cost first, then turn it into per-square-foot prices for the surfaces you do often. Customers see a simple rate, and you get paid more when you're fast. The hourly rate calculator works out what an hour of your time has to bring in.

Meet other owners

Comparing numbers with other owners is the fastest way to spot a price that's off. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge per square foot for pressure washing? Work it out from your own speed and costs. In the example, flat concrete comes to about $0.27 a square foot on a 1,000 square foot job and $0.23 on 3,000 square feet.

Why do small jobs cost more per square foot? Setup, the drive and cleanup take the same time on every job. On a small job, that time is spread over fewer square feet.

Should siding cost more per square foot than concrete? Usually, yes. It's slower, uses more chemical and needs more care. Time it separately and give it its own rate.

Do I still need a minimum charge? Yes. Without one, small jobs can cost you more than they pay once you count the drive and setup.

Run your numbers: the free pressure washing pricing calculator prices any job from your own costs. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading