The Playbook
PricingPricing guide for every trade →

How Much to Charge for Smoke Detector Installation

Short answer

Price smoke detector installation from the electrician time to remove old units, mount new ones, connect and test, plus the detectors and your overhead, then divide by one minus your margin. In our example replacing 4 hardwired detectors prices at $405.00, about $101.25 a detector, and a whole-house set of 8 at $810.00.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 2 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Sell the safety check
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Smoke detectors expire, and many homes have a full set that needs replacing at once. It is a clean, quick job that is easy to quote per detector. Price the job, then show the per-detector number.

The formula

  1. Count the detectors: how many, hardwired or battery, and whether they are interconnected.
  2. Electrician time: remove old units, swap adapters, mount, connect and test the whole set.
  3. Materials: detectors, combo smoke and CO units, adapters and wire.
  4. Add overhead for your license, van, tools and insurance, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $40 an hour
  • Overhead: 35%
  • Margin: 40%

Replace 4 hardwired detectors: 1.5 hours, $120 of detectors and parts. Labor $60. Labor plus materials $180. Overhead $63. Total cost $243. Price: $243 / 0.60 = $405.00, about $101.25 a detector.

Whole-house set of 8 interconnected detectors: 2.5 hours, $260 of detectors and parts. Labor $100. Labor plus materials $360. Overhead $126. Total cost $486. Price: $486 / 0.60 = $810.00, about $101.25 a detector.

The electrical estimate calculator prices any job from your own numbers.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • New wiring: adding a detector where there was none means running wire.
  • High ceilings: ladders and vaulted ceilings slow the job.
  • Combo units: smoke and CO detectors cost more than smoke only.
  • Customer-supplied detectors: take the detectors out of materials, but keep your time.

Sell the safety check

While you are on every ceiling, offer to check outlets, GFCIs and the panel. It is a natural add-on and often leads to the next job.

Pricing a similar job? See How Much to Charge for Outlet Installation and How Much to Charge for Light Fixture Installation, or run your own numbers in the electrical estimate calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

Electricians, HVAC and handyman companies send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge to install smoke detectors? Build it from electrician time, detectors and overhead at your margin. In the example replacing 4 hardwired detectors comes to $405.00.

How much per detector? In the example about $101.25 a detector.

How much for a whole house? In the example a set of 8 interconnected detectors comes to $810.00.

What if the customer buys the detectors? Take them out of materials, but keep your time and overhead in the price.

Run your numbers: the free electrical estimate calculator prices any job from your own costs. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading