EV charger installs are one of the best add-ons an electrician can sell, but the price depends almost entirely on two things: the distance from the panel and whether the panel can take the load. Price the run, not the charger.
The formula
- Check the panel. Space for a 2-pole breaker and enough capacity, after a load calculation.
- Materials: wire for the run, breaker, conduit or cable, receptacle or disconnect, and fittings.
- Electrician-hours: the run, fishing walls, mounting, connecting and testing.
- Add overhead for the van, permits, insurance and tools, and price to your margin.
Worked examples
These are example numbers. Use your own.
- Labor cost: $40 an hour
- Overhead: 35%
- Margin: 40%
40-amp circuit, panel in the garage, 20-foot run: $120 in wire, breaker and receptacle, 3 electrician-hours. Labor $120. Labor plus materials $240. Overhead $84. Total cost $324. Price: $324 / 0.60 = $540.00.
60-foot run through finished space, charger hardwired: $260 in materials, 6 electrician-hours. Labor $240. Labor plus materials $500. Overhead $175. Total cost $675. Price: $675 / 0.60 = $1,125.00.
The long run costs about twice as much because of the hours fishing through finished walls and ceilings, not the parts. The electrical estimate calculator prices any job from your own numbers.
Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.
What changes the price
- Panel capacity: if the load calculation fails, a panel upgrade or load management device is a separate, bigger job. Quote it separately.
- Distance and route: an open basement or garage is quick. Finished walls, ceilings and exterior runs take longer.
- Amperage: a 60-amp circuit needs heavier wire than a 40-amp one.
- Permits: include the permit fee and the inspection visit where required.
- Who supplies the charger: if you supply it, add it to materials and price it to your margin.
Ask for photos first
A photo of the panel and where the charger goes tells you most of the job before you drive out. Quote ranges from photos, then confirm on site.
Related pricing guides
Pricing a similar job? See How Much Should an Electrician Charge Per Hour? and How Much to Charge for Ceiling Fan Installation, or run your own numbers in the electrical estimate calculator.
Check the rest of your pricing
The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.
Meet other owners
Electricians, HVAC companies and solar installers send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.
FAQ
How much should I charge to install an EV charger? Build it from materials, electrician-hours and overhead at your margin. In the example a short garage run comes to $540.00, with the customer supplying the charger.
Why do EV charger installs vary so much? Distance and panel capacity. In the example a 60-foot run through finished space comes to $1,125.00.
What if the panel is full? A panel upgrade or load management device is a separate job. Quote it on its own line.
Do I need a permit for an EV charger? Most areas require one for a new circuit. Include the fee and the inspection visit.
Run your numbers: the free electrical estimate calculator prices any job from your own costs. No sign-up.