The Playbook
PricingPricing guide for every trade →

How Much to Charge for Mini Split Installation

Short answer

Price a mini split install from the equipment and line set, the tech-hours to mount the indoor and outdoor units, run the line set and drain, wire, vacuum and start up, plus your overhead, then divide by one minus your margin. In our example a single-zone system prices at $3,560.00 and a two-zone system at $6,580.00.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 2 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Quote good, better, best
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Mini splits are a growing share of HVAC work: no ducts, high efficiency, and one room or zone at a time. Equipment is most of the cost, but the line set routing, drain and electrical take the hours. Price the whole job to your margin.

The formula

  1. Plan the zones: where each indoor head goes, the outdoor unit, and the line set route.
  2. Equipment and materials: outdoor unit, indoor heads, line sets, line hide, pad, disconnect and wire.
  3. Tech-hours: mounting, drilling, running lines and drain, electrical, vacuum, charge check and startup.
  4. Add overhead for tools, vacuum pump, permits, the van and insurance, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $35 an hour
  • Overhead: 30%
  • Margin: 35%

Single-zone system: $1,500 in equipment and materials, 8 tech-hours. Labor $280. Labor plus materials $1,780. Overhead $534. Total cost $2,314. Price: $2,314 / 0.65 = $3,560.00.

Two-zone system: $2,800 in equipment and materials, 14 tech-hours. Labor $490. Labor plus materials $3,290. Overhead $987. Total cost $4,277. Price: $4,277 / 0.65 = $6,580.00.

The HVAC labor rate calculator sets the hourly cost these prices are built on.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • Line set length: long runs and routing through finished walls take more time and material.
  • Electrical: a new circuit and disconnect may need an electrician.
  • Mounting: high walls, second floors and brackets for the outdoor unit add time.
  • Permits and rebates: include permit fees and the time to file rebates.

Quote good, better, best

Offer two or three equipment levels, each priced to your margin. Many customers choose the middle.

Pricing a similar job? See How Much to Charge for AC Installation and HVAC Labor Rates Per Hour, or set your rate in the HVAC labor rate calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

HVAC companies, electricians and remodelers send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge to install a mini split? Build it from equipment, tech-hours and overhead at your margin. In the example a single-zone system comes to $3,560.00.

How much for two zones? In the example a two-zone system comes to $6,580.00.

Does a mini split need a new circuit? Usually. Quote the electrical or refer it.

Should I mark up the equipment? Price the whole job to your margin, equipment included.

Set your rate: the free HVAC labor rate calculator works out what an hour has to bill. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading