The Playbook
PricingPricing guide for every trade →

How Much to Charge for AC Installation

Short answer

Price an AC install from the equipment and materials, the tech-hours for removal, setting, line set, electrical and startup, and your overhead, then divide by one minus your margin. In our example a 3-ton AC and coil replacement prices at $8,320.00, and a full heat pump system at $12,080.00.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 3 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Give good, better, best
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Equipment is the biggest line on an AC install, so it's tempting to quote equipment plus a labor number. That leaves out the warranty callbacks, permits, trucks and office time your margin has to cover. Price the whole job to your margin.

The formula

  1. Equipment: condenser, coil or air handler, at what you actually pay.
  2. Materials: line set, pad, disconnect, whip, refrigerant, drain parts and thermostat.
  3. Tech-hours: recovery and removal, setting, brazing, pressure test, vacuum, electrical and startup, for everyone on the job.
  4. Add overhead for trucks, tools, permits, insurance and dispatch, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $35 an hour
  • Overhead: 30%
  • Margin: 35%

3-ton AC and matching coil, same location: $3,600 in equipment and materials, 2 techs for a day (16 tech-hours). Labor $560. Labor plus materials $4,160. Overhead $1,248. Total cost $5,408. Price: $5,408 / 0.65 = $8,320.00.

Full heat pump system, outdoor unit and air handler: $5,200 in equipment and materials, 24 tech-hours. Labor $840. Labor plus materials $6,040. Overhead $1,812. Total cost $7,852. Price: $7,852 / 0.65 = $12,080.00.

The heat pump costs more for both the equipment and the extra day of labor. The HVAC labor rate calculator sets the hourly cost these jobs are built on.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • Line set: reusing it is faster. A new or longer line set is more material and more hours.
  • Access: attics, crawl spaces and rooftop units slow the job and may need extra hands.
  • Electrical: a new disconnect, a bigger breaker or a new circuit adds time and parts.
  • Ductwork: sizing problems or a new plenum are separate work. Quote them on their own line.
  • Permits and rebates: include the permit fee and the time to file rebate paperwork if you handle it.

Give good, better, best

Quote two or three equipment options on the same estimate, each priced to your margin. Customers like choosing, and many pick the middle one.

Pricing a similar job? See HVAC Labor Rates Per Hour and How Much to Charge for Water Heater Installation, or set your rate in the HVAC labor rate calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

HVAC companies, plumbers and electricians send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge to install central air? Build it from equipment, materials, tech-hours and overhead at your margin. In the example a 3-ton AC and coil replacement comes to $8,320.00.

How much should I charge for a heat pump install? More equipment and more hours. In the example a full heat pump system comes to $12,080.00.

Should I mark up equipment? Price the whole job to your margin, equipment included. The margin pays for warranty callbacks, the office and the risk.

Should I include ductwork changes? Quote them as a separate line so the customer can see and approve them.

Set your rate: the free HVAC labor rate calculator works out what an hour has to bill. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading