The Playbook
Hiring

What to Pay a Service Tech (And What They Really Cost)

Short answer

Pay a service tech the local market rate, then know their true cost: a $28-an-hour tech costs about $89,252 a year with taxes, workers' comp, tools and a van, or $42.91 per paid hour. To cover that plus overhead and a 15% margin, their billed labor needs to be about $109.64 an hour.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 8 min read

In this article
  1. Step 1: Get the real market rate (not the salary-site guess)
  2. Step 2: Add the burden
  3. Step 3: Divide by billable hours, not paid hours
  4. Step 4: The number that tells you if you can afford this hire
  5. Step 5: Pick a pay structure
  6. Build the ladder so raises stop being a negotiation
  7. Three scripts you can use this week
  8. The three mistakes that cost the most
  9. FAQ
  10. Where these numbers come from

Every salary page you find when you Google this is written for the guy applying for the job, not the guy signing the check. They tell you what techs earn. They don't tell you what a tech costs you, what he has to bill to pay for himself, or how to build a pay plan that doesn't blow up in month four.

Here's the whole thing, with the math.

Step 1: Get the real market rate (not the salary-site guess)

Skip the aggregator sites. Their numbers are scraped from job postings and self-reported, and they're usually wrong for your metro.

Use the Bureau of Labor Statistics OEWS data instead. It's free, it's survey data from actual employers, and you can filter to your metro area. As of the May 2025 release, national medians run about $34.70/hr for plumbers and pipefitters, $34.37/hr for electricians, and $32.75/hr for HVAC mechanics and installers. Helpers in those trades average closer to $21/hr.

Pull your metro's number. Then pay attention to the 25th and 75th percentile columns, not just the median. That spread is your negotiating room, and it's the range your ladder gets built inside.

Step 2: Add the burden

The line items nobody puts on the offer letter

The wage is maybe 70% of what the person costs. Nationally, across private industry, benefits run 30.1% of total compensation, meaning total comp is roughly 1.43x wages (BLS Employer Costs for Employee Compensation, March 2026). Small shops that don't offer health insurance or a retirement match land lower, usually 1.13x to 1.20x, because their burden is almost entirely taxes and workers' comp.

What actually goes in:

  • Employer FICA: 7.65% (6.2% Social Security up to the $184,500 wage base in 2026, plus 1.45% Medicare)
  • FUTA: 6.0% on the first $7,000, almost always credited down to 0.6%, about $42/year
  • State unemployment (SUTA): varies wildly by state and your experience rating
  • Workers' comp: the big one. Plumbing (NCCI class 5183) averages around $3.05 per $100 of payroll nationally and commonly runs $3–$5. Higher-risk classes like roofing and some electrical work can run $7–$20 per $100. Get your actual rate off your policy. Don't guess.

Worked example: a $28/hour tech

Line Annual
Wages ($28 × 2,080) $58,240
Employer FICA (7.65%) $4,455
FUTA $42
SUTA (2% example) $1,165
Workers' comp ($4.00 per $100) $2,330
Payroll subtotal $66,232
Phone, uniforms, boots $1,320
Software seat $1,200
Small tools + consumables $1,500
Training and certs $1,000
Van, all-in ($1,500/mo) $18,000
True cost to employ $89,252

Payroll alone is 1.14x the wage. Add the truck and the stuff, and your "$28 guy" costs $42.91 for every hour you pay him.

Swap in your own workers' comp rate, your own SUTA rate, and your real van number. Those three lines move this total by thousands.

Step 3: Divide by billable hours, not paid hours

This is where most owners get it wrong, and it's the expensive mistake.

You pay for 2,080 hours. You don't bill 2,080 hours. Subtract holidays and PTO, shop time, truck stocking, meetings, training, unbilled drive time, and warranty callbacks. Most owners plan on 40 billable hours a week and end up somewhere around 25 to 30 for a service tech.

Use 28 billable hours a week × 48 weeks = 1,344 billable hours.

$89,252 ÷ 1,344 = $66.41 per billable hour, and you haven't paid for the office, the phones, the marketing, the bookkeeper, or yourself yet.

Step 4: The number that tells you if you can afford this hire

Add that tech's share of shop overhead. If your overhead is $9,000/month and you have three field bodies, that's $3,000/month, or $36,000/year, per body.

$89,252 + $36,000 = $125,252 ÷ 1,344 = $93.19/hour to break even.

Now add profit. Don't add a percentage. Divide by (1 minus your target). At 15% net:

$93.19 ÷ 0.85 = $109.64/hour billed.

And the revenue that tech has to produce: $109.64 × 1,344 = $147,356 in billed labor a year. If you also sell parts and equipment at a margin, some of that load gets carried there. If you're a labor-only shop, it doesn't.

The 4x sanity check

Look at the ratio: $110 billed ÷ $28 wage = 3.9x.

That's the shortcut. For a small shop giving each tech a truck, your billed labor rate needs to be roughly 3.5x to 4x the tech's hourly wage. If you're charging $85/hour and paying $32, you are not making money on that person and no amount of hustle fixes it.

The helper exception

Run the same table for a $19/hr helper who rides with you and gets no truck. Payroll subtotal lands near $45,000, plus about $3,000 in phone, boots, and small tools. Call it $48,000.

No van line. That's why a helper is often the highest-return hire in the business: he only needs to add about $48K–$55K of throughput a year to pay for himself, and if he cuts 30 minutes off every job you run, he does that easily.

Hire the helper before you hire the second truck.

Step 5: Pick a pay structure

Straight hourly

Wage plus overtime after 40. Simple, predictable, hard to screw up legally. Right for helpers, apprentices, and install crews where the guy doesn't control what gets sold.

Weakness: you're buying hours, not outcomes.

Hourly plus a performance piece

The one most small shops should run.

Example: $26/hr base, plus 6% of everything the tech bills above $12,000 in a month, plus $25 per maintenance membership sold, plus $100 in any month with zero warranty callbacks.

A tech billing $20,000 in a month picks up $480 from the percentage. Real money, and every dollar of it is tied to something he personally controls.

Rule: never tie a bonus to total company revenue. Tie it to his billable hours, his close rate, his memberships, his callbacks. If he can't move the number by working differently on Tuesday, it isn't a pay plan, it's a gift.

Percentage against a guaranteed hourly

Don't copy someone else's percentage. Back into yours:

Percentage = target annual pay ÷ expected annual production.

Using the example above: $58,240 target pay ÷ roughly $208,000 of expected production (labor plus materials) = 28% of what he bills, guaranteed at $27/hr. Your numbers will land somewhere else. That's fine. What's not fine is picking 10% because you heard it at a trade show.

Before you announce any percentage plan, run it backwards against last year's actual numbers for your best producer, your average producer, and your weakest. If the plan would have paid your best guy less than he actually made, it's dead on arrival and you've just told your best tech you're cutting his pay.

One caution: for non-exempt employees, overtime has to be recalculated on the regular rate including commissions and non-discretionary bonuses. Have your payroll provider or an employment attorney read the plan before it goes out. This is a cheap conversation and an expensive mistake.

Build the ladder so raises stop being a negotiation

Write down three or four levels, the pay at each, and the specific things you have to do to move up. Post it. Example:

  • Helper ($19–21): rides along, no solo calls
  • Tech I ($25–28): runs basic service calls solo, hits 25 billable hrs/wk
  • Tech II ($30–34): runs any call in the book, presents options, under 3% callback rate
  • Lead ($36–40+): trains, handles escalations, on-call rotation lead

Now a raise conversation isn't a negotiation about how the guy feels. It's a checklist. And when you move someone up $3/hr, the 4x check tells you your billed rate has to move about $10–12/hr with it, or that raise comes straight out of your net.

Three scripts you can use this week

The offer call

"I want to make you an offer. Base is $28 an hour, paid weekly, overtime after 40. Van, gas card, phone, uniforms and boots on me. On top of the base there's a performance piece: 6% of everything you bill over $12,000 in a month, and $25 for every maintenance plan you sell. For a guy running your kind of calls that's been about $400 a month. At 90 days we sit down, and if you're at 25 billable hours a week and under a 3% callback rate, base goes to $30. Does that work for you? And if it doesn't, tell me the number that does, because I'd rather find that out now than in six weeks."

The 90-day sit-down

Put it on the calendar the day he starts. Three numbers, agreed up front, reviewed out loud: billable hours per week, callback rate, memberships sold. Then one of three outcomes: he hits it and moves up the ladder, he's close and you name exactly what's missing and set a 30-day date, or he's not going to get there and you say so plainly. Nobody should be surprised in month six.

"I got offered $3 more an hour"

"I'm glad you told me instead of just leaving. I'm not going to talk you out of more money, you should go get it. Here's what I can do: [number]. Here's what I can't. Before you decide, go ask them five things: who buys your tools, what the on-call rotation looks like, how their pay plan treats a slow February, how far you're driving, and who's actually supervising you. Take a day. If you take it, no hard feelings and I'll be a reference. If you stay, we're not doing this again in six months, we put your next step in writing today."

The three mistakes that cost the most

  1. Overpaying to close a hire you already know is a B player. You can't out-pay a bad fit, and you just reset the top of your ladder for everyone else.
  2. Bonusing on things the tech can't control. Company revenue isn't a pay plan. His callback rate is.
  3. Raising pay without raising the billed rate. Run the 4x check every single time.

FAQ

How much does a $28 an hour tech really cost? In the worked example, about $89,252 a year once payroll taxes, workers' comp, tools, software and a van are added. That's $42.91 for every hour you pay, and $66.41 for every hour you bill.

What should I charge for a tech's time? Enough to cover their full cost, their share of overhead and your margin, spread over the hours they actually bill. In the example that's $109.64 an hour, roughly 3.9 times the wage.

Should I hire a helper or a second truck first? Often a helper. With no van, a helper costs far less and can pay for himself by speeding up every job you run.

How do I find my tech's real billable hours? Pull two weeks of invoiced hours from your field-service software and compare them to paid hours. Most service techs land around 25 to 30 billable hours a week.

Where these numbers come from

Everything else in here is arithmetic. Run it with your numbers, not mine.

Price the labor right: the free job pricing calculator builds a quote from what an hour of labor really costs you. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading