The Playbook
PricingPricing guide for every trade →

Markup vs Margin in Construction (Conversion Table)

Short answer

Markup is profit as a percentage of your cost; margin is profit as a percentage of the price, so the same job always has a higher markup than margin. To keep a 20% margin you need a 25% markup, and to keep 30% you need a 42.9% markup: markup = margin / (1 - margin).

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 2 min read

In this article
  1. The two formulas
  2. Conversion table
  3. Why it matters on a real job
  4. Which one should contractors use?
  5. Where overhead fits
  6. FAQ

Markup and margin both describe profit, but they measure it against different numbers. Mixing them up is one of the most common pricing mistakes in construction, and it always goes the same way: you keep less than you planned.

The two formulas

  • Markup = profit / cost
  • Margin = profit / price

On a job that costs $10,000 and sells for $12,500, the profit is $2,500. That's a 25% markup ($2,500 / $10,000) but only a 20% margin ($2,500 / $12,500).

To go from the margin you want to the markup you need: markup = margin / (1 - margin). To go the other way: margin = markup / (1 + markup).

Conversion table

Margin you want to keep Markup you need on cost
10% 11.1%
15% 17.6%
20% 25.0%
25% 33.3%
30% 42.9%
35% 53.8%
40% 66.7%
50% 100.0%

And the mistake in reverse, the margin you actually keep when you mark up by:

Markup on cost Margin you keep
10% 9.1%
15% 13.0%
20% 16.7%
25% 20.0%
30% 23.1%
50% 33.3%
100% 50.0%

Why it matters on a real job

Say your overhead and profit target is a 20% margin, and you price a $50,000 job by adding 20% to cost. Price: $60,000. Profit: $10,000. Margin: $10,000 / $60,000 = 16.7%, not 20%.

To actually keep 20%, divide cost by 0.80: $50,000 / 0.80 = $62,500. That's a 25% markup, and $2,500 more on one job.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

Which one should contractors use?

Price with margin, because it's how your profit and loss statement reads: profit as a share of revenue. If your business needs 20% of every dollar of sales to cover overhead and profit, price every job to a 20% margin by dividing its cost by 0.80.

Use markup only as the number you apply on a spreadsheet, and convert it from your target margin with the table above. The markup vs margin calculator does the conversion, and the contractor markup calculator prices a whole job from materials, labor and overhead.

Where overhead fits

Overhead is a cost, not profit. Add your overhead to the job's cost first, then price to the margin you want to keep as profit. If you fold overhead into the "markup", make sure the markup is big enough to cover both. The guide to calculating business overhead shows how to find your overhead percentage.

FAQ

What's the difference between markup and margin in construction? Markup is profit divided by cost; margin is profit divided by the selling price. A 25% markup is a 20% margin.

What markup do I need for a 30% margin? 42.9%. Divide your cost by 0.70 to get the price.

Is a 20% markup the same as a 20% margin? No. A 20% markup leaves a 16.7% margin. To keep 20%, you need a 25% markup.

What margin should a contractor aim for? There's no single right number. Work out what your business needs to keep after overhead for profit, slow months and equipment, and price every job to at least that margin.

Run your numbers: the free markup vs margin calculator converts any margin to the markup you need. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading