The Playbook
PricingPricing guide for every trade →

How Much to Charge for a Sprinkler Blowout

Short answer

Price a sprinkler blowout from the time on site to shut off the water, connect the compressor and clear each zone, plus fuel and overhead for the compressor and truck, then divide by one minus your margin. In our example a 6-zone system prices at $54.00 and a 12-zone system at $99.69.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 2 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Book the spring startup now
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Blowouts are seasonal route work: lots of short stops in a few busy weeks before the freeze. The compressor and the drive are most of the cost, so tight routes and a clear price per system matter more than the minutes on each zone.

The formula

  1. Count the zones and find the shutoff and backflow device.
  2. Time on site: shutting off the water, connecting, blowing out each zone, draining the backflow and setting the controller.
  3. Materials: compressor fuel and any small fittings.
  4. Add overhead for the compressor, truck and insurance, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $24 an hour
  • Overhead: 35%
  • Margin: 35%

6-zone residential system: 0.75 hours on site, $8 of fuel and fittings. Labor $18. Labor plus materials $26. Overhead $9.10. Total cost $35.10. Price: $35.10 / 0.65 = $54.00.

12-zone residential system: 1.5 hours on site, $12 of fuel and fittings. Labor $36. Labor plus materials $48. Overhead $16.80. Total cost $64.80. Price: $64.80 / 0.65 = $99.69.

The lawn care pricing calculator prices any route from your own numbers.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • Zones: more zones mean more time. Many companies price per zone above a base.
  • Access: a hard-to-reach shutoff or backflow device slows every stop.
  • Repairs: broken heads or valves found during the blowout are separate work. Quote them for spring.
  • Route density: stops on the same street cost far less than stops across town.

Book the spring startup now

Every blowout customer needs a spring startup. Book it before you leave, so next season's route is already full.

Pricing a similar job? See How Much to Charge for Lawn Aeration and How Much to Charge for Leaf Removal, or run your own numbers in the lawn care pricing calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

Irrigation, lawn and landscaping companies send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge for a sprinkler blowout? Build it from time on site, fuel and overhead at your margin. In the example a 6-zone system comes to $54.00.

How much for a bigger system? In the example a 12-zone system comes to $99.69.

Should I charge per zone? Many companies charge a base price plus a price per zone above it. Build both from your real time.

What if I find broken heads? Note them and quote the repair for the spring startup.

Run your numbers: the free lawn care pricing calculator prices any route from your own costs. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading