The Playbook
PricingPricing guide for every trade →

How Much to Charge for Roof Repair

Short answer

Price a roof repair from the crew-hours to find the leak, remove damaged shingles, replace flashing or underlayment and seal, plus materials and your overhead, then divide by one minus your margin, with a minimum for the trip and ladders. In our example replacing about ten shingles and resealing flashing prices at $250.00, and a valley and flashing repair at $550.00.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 2 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Set a minimum
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Roof repairs are small jobs with full setup: ladders, safety gear and the drive, for a few hours on the roof. Finding the real source of a leak is part of the job. Price the hours, and set a minimum for any repair.

The formula

  1. Find the leak: missing shingles, failed flashing, nail pops or a bad valley.
  2. Crew-hours: setup, tear-off of the damaged area, new underlayment, shingles or flashing, sealing and cleanup.
  3. Materials: shingles, underlayment, flashing, sealant and nails.
  4. Add overhead for ladders, harnesses, the truck and insurance, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $30 an hour
  • Overhead: 25%
  • Margin: 25%

Replace about ten shingles and reseal flashing: 3 crew-hours, $60 in materials. Labor $90. Labor plus materials $150. Overhead $37.50. Total cost $187.50. Price: $187.50 / 0.75 = $250.00.

Valley and flashing repair: 6 crew-hours, $150 in materials. Labor $180. Labor plus materials $330. Overhead $82.50. Total cost $412.50. Price: $412.50 / 0.75 = $550.00.

The roofing profit margin calculator checks any bid against the margin you need.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • Pitch and height: steep and tall roofs need more safety setup.
  • Matching shingles: older roofs may need close-match shingles.
  • Decking damage: soft decking under the leak is extra.
  • Emergency calls: active leaks in a storm may carry a rush rate.

Set a minimum

Even a few shingles need ladders, safety gear and the drive. Price your smallest real repair and make it your minimum.

Pricing a similar job? See How Much to Charge for a Roof Replacement Per Square and How Much to Charge for a Roof Inspection, or check your numbers in the roofing profit margin calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

Roofers, gutter companies and painters send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge for a roof repair? Build it from crew-hours, materials and overhead at your margin. In the example replacing about ten shingles and resealing flashing comes to $250.00.

How much for a valley or flashing repair? In the example it comes to $550.00.

Should I charge a minimum? Yes. Every repair carries the setup and the drive.

What if the decking is rotten? Quote it separately once you see it.

Check your bid: the free roofing profit margin calculator shows the margin on any job. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading