The Playbook
PricingPricing guide for every trade →

How Much to Charge for a Chimney Sweep

Short answer

Price a chimney sweep from the tech time to set up, sweep the flue, clean the firebox and smoke chamber, inspect and clean up, plus supplies and your overhead for brushes, vacuums, cameras and insurance, then divide by one minus your margin. In our example a standard sweep and inspection prices at $118.46, and a heavy-creosote job with two flues at $247.69.

Get every pricing calculator for your trade, free. Plus a group of owners who compare prices and swap referrals. Free to join, no card.

Or take the free 60-second pricing check

By the Growvio team 2 min read

In this article
  1. The formula
  2. Worked examples
  3. What changes the price
  4. Book the fall early
  5. Related pricing guides
  6. Check the rest of your pricing
  7. Meet other owners
  8. FAQ

Chimney sweeping is seasonal and specialist: a busy fall, a quiet spring, and real liability. Most of the job is careful setup and cleanup so no soot gets into the house. Price the visit fully, and sell repairs you find as separate work.

The formula

  1. Know the chimney: number of flues, wood or gas, and how long since the last sweep.
  2. Tech time: drop cloths and vacuum setup, sweeping, cleaning the firebox and smoke chamber, inspection and cleanup.
  3. Supplies: brush wear, filters, drop cloths and creosote remover if needed.
  4. Add overhead for brushes, rods, vacuums, the inspection camera, ladders and insurance, and price to your margin.

Worked examples

These are example numbers. Use your own.

  • Labor cost: $30 an hour
  • Overhead: 40%
  • Margin: 35%

Standard sweep and inspection, one flue: 1.5 hours, $10 of supplies. Labor $45. Labor plus supplies $55. Overhead $22. Total cost $77. Price: $77 / 0.65 = $118.46.

Heavy creosote, two flues: 3 hours, $25 of supplies. Labor $90. Labor plus supplies $115. Overhead $46. Total cost $161. Price: $161 / 0.65 = $247.69.

The job pricing calculator prices any job from your own numbers.

Is your pricing leaking money? Free 60-second check, five questions. Answers stay in your browser.

Question 1 of 5

Or your average take per hour on jobs.

$/hr

What changes the price

  • Creosote: glazed creosote needs chemical treatment and more time.
  • Flues: each extra flue adds time.
  • Roof access: steep or tall roofs need more setup.
  • Camera inspection: a full camera report is extra time and equipment. Price it as a level of inspection.
  • Repairs: caps, crowns and liners are separate quotes.

Book the fall early

Offer a pre-season booking discount or reminder in late summer, so the fall rush is scheduled, not chaotic.

Pricing a similar job? See How Much to Charge for Dryer Vent Cleaning and How Much to Charge for Roof Cleaning, or run your own numbers in the job pricing calculator.

Check the rest of your pricing

The free 60-second Profit Leak Check shows whether your hourly rate covers your pay, overhead and profit, and whether your markup keeps what you think.

Meet other owners

Chimney sweeps, roofers and HVAC companies send each other work. Growvio is a free group where home-service owners swap referrals and what's working. Join free, it takes about a minute.

FAQ

How much should I charge for a chimney sweep? Build it from tech time, supplies and overhead at your margin. In the example a standard sweep and inspection comes to $118.46.

How much for heavy creosote or two flues? In the example it comes to $247.69.

Is an inspection included? A basic visual inspection usually is. A camera inspection is extra.

Should I quote repairs on the spot? Note what you find and quote repairs separately.

Run your numbers: the free job pricing calculator prices any job from your own costs. No sign-up.

Every pricing calculator and guide for your trade, free.

Hourly rate, job pricing, markup and hiring calculators for the trades, plus a free group of owners who run the same kind of business. Free to join, no card.

Free to join. No credit card.

Keep reading